Protective equipment for laser cleaners.
by PULSAR Laser
Protect your eyes and lungs with high-quality protective products, and on this page you will also find protective glass to protect your laser cleaner.
Slides must be kept clean and undamaged.
If they are heavily soiled or damaged, they must be replaced. Otherwise you may damage your laser cleaner.
If the glass is dirty, you will no longer have any cleaning power.
We also recommend replacing the protective glass after 200 hours of cleaning
The price includes transport to the customer and training.
Price does not include taxes and any applicable customs fees (Customs fees only apply to customers outside of Canada)
You can find our prices below. Our prices are transparent and available without registration.
Accessories
43 x 2 mm 1064 nanometres
Protects the laser source from damage.
The protective glass would change according to the following rules:
(whichever comes first)
1. when it is dirty (can also be cleaned)
2. when it is cracked or broken! Mandatory replacement
3. after 200 hours of operation of the laser cleaner! Mandatory replacement
the picture is illustrative
Protects the laser source from damage.
The protective glass would change according to the following rules:
(whichever comes first)
1. when it is dirty (can also be cleaned)
2. when it is cracked or broken! Mandatory replacement
3. after 200 hours of operation of the laser cleaner! Mandatory replacement
the picture is illustrative
Price without discount38 $ USD
Accessories
48 x 3 mm 1064 nanometre
Protects the laser source from damage.
The protective glass would change according to the following rules:
(whichever comes first)
1. when it is dirty (can also be cleaned)
2. when it is cracked or broken! Mandatory replacement
3. after 200 hours of operation of the laser cleaner! Mandatory replacement
the picture is illustrative
Protects the laser source from damage.
The protective glass would change according to the following rules:
(whichever comes first)
1. when it is dirty (can also be cleaned)
2. when it is cracked or broken! Mandatory replacement
3. after 200 hours of operation of the laser cleaner! Mandatory replacement
the picture is illustrative
Price without discount48 $ USD
Accessories
Recommended for laser cleaner with power 200W and more
48 x 3 mm 1064 nanometre
Protects the laser source from damage.
The protective glass would change according to the following rules:
(whichever comes first)
1. when it is dirty (can also be cleaned)
2. when it is cracked or broken! Mandatory replacement
3. after 200 operating hours of the laser cleaner! Mandatory replacement
the image is illustrative
48 x 3 mm 1064 nanometre
Protects the laser source from damage.
The protective glass would change according to the following rules:
(whichever comes first)
1. when it is dirty (can also be cleaned)
2. when it is cracked or broken! Mandatory replacement
3. after 200 operating hours of the laser cleaner! Mandatory replacement
the image is illustrative
Price without discount112 $ USD
Accessories
They protect the eyes from the laser.
Protection level OD8+
Suitable for lasers with a wavelength of 750 to 1070 nm.
The photo is illustrative.
Protection level OD8+
Suitable for lasers with a wavelength of 750 to 1070 nm.
The photo is illustrative.
Price without discount222 $ USD
Accessories
Perfectly protects your eyes from the laser
wavelength 750 nm to 1070 nm
You are still breathing clean air, supplied by the compressor through the filter
The air duct integrated into the mask lets you breathe only clean, fresh air
Constant nominal flow of filtered air
Adjustable airflow.
Work safely and comfortably!
*illustrative photos*
wavelength 750 nm to 1070 nm
You are still breathing clean air, supplied by the compressor through the filter
The air duct integrated into the mask lets you breathe only clean, fresh air
Constant nominal flow of filtered air
Adjustable airflow.
Work safely and comfortably!
*illustrative photos*
Price without discount2 737 $ USD